Reactive acid stains and designer water-based color, worked into diamond-ground concrete and sealed under UV-stable clear coats. No two floors alike — on purpose.
Translucent color worked into the concrete itself, sealed under premium clear coats — every floor a one-of-one.
Concrete stain doesn't sit on the slab the way paint does — it becomes part of it. The color is translucent, so the concrete's natural variation reads through: trowel arcs, aggregate shadows, the subtle mottling every slab carries. That's the magic of a stained floor. It has depth. It looks like stone, leather, or old-world plaster, depending on the palette — and no two floors ever come out the same.
We work with two families of stain. Reactive acid stains are mineral solutions that chemically react with the lime in your concrete, developing marbled, variegated earth tones — ambers, terracottas, walnut browns, mossy greens — that are literally permanent, because the color is a chemical change in the slab, not a film on it. Water-based stains take the modern route: a broad, controllable palette from soft translucent grays to saturated colors, with more uniform coverage and no reaction chemistry — the pick when you want a specific, consistent tone.
Either way, the color gets locked under a premium clear sealer system — the same urethane/siloxane finish from our grind & seal service for UV-stable, breathable protection, in your choice of matte, satin, or gloss. Indoors or out, the sealer is what keeps the color rich and the maintenance minimal for years.
Stain & Seal — Layer by Layer
Both beautiful, differently. Here's how to think about the choice.
A mineral solution that reacts with the concrete itself, developing color over hours like a photograph. The result is variegated, marbled, and utterly unique — richest in the earth-tone family. Because the color is a chemical change in the slab, it can never peel or flake. After the reaction completes, we neutralize, rinse, and seal.
Translucent pigment carried into the pores of the ground slab. The palette is wide open — cool grays, warm taupes, blues, even bold brand colors — and coverage is more uniform and predictable than reactive chemistry. Low odor and fast-working, it's the modern designer's stain.
Stained floors carry hospitality spaces, design-forward interiors, and Southern outdoor living beautifully.
Stained concrete is a one-of-one by nature. We'll sample colors on your slab so you can pick with confidence.
Book My Free Estimate Call (912) 656-2536Color is only half the job — the sealer system is what keeps it beautiful for a decade.
Professional-grade mineral stain solutions in the classic earth-tone range. Applied by sprayer and worked in, allowed to react and develop, then neutralized and rinsed clean before sealing. Colors can be layered and blended for tortoiseshell depth no factory floor can imitate.
Low-VOC translucent stains that carry pigment deep into the open pores of a diamond-ground slab. Available in a wide designer palette, layerable for custom effects, and predictable enough for logo work, borders, and multi-tone patterns.
Before color, we harden the canvas: a lithium silicate densifier reacts within the surface to densify and dust-proof the slab, so both the stain and the sealer above it anchor into strong, tight concrete.
Indoors, a premium clear urethane delivers wear resistance with your choice of sheen. Outdoors — and anywhere sun hits — we finish with the urethane/siloxane hybrid: UV-stable so the color never yellows, breathable so slab moisture never blisters it, and waterproof against Lowcountry rain. Matte, satin, or gloss.
Ninety percent of coating failures trace back to poor preparation. That's why we never skip it — and never rush it.
Stain quality is decided before the first drop of color: the slab must be uniformly ground and perfectly clean, or the stain takes unevenly and every flaw telegraphs. Our 20–30 inch propane diamond grinders open the surface consistently across the whole floor while SVX-series HEPA vacuums leave it spotless — the difference between blotchy color and the deep, even tones you saw in the sample.
Our 20–30 inch propane planetary diamond grinders profile the entire slab evenly — no cords, no missed spots, no shortcuts. Every floor is mechanically ground to the correct concrete surface profile (CSP) for the system going down on top of it.
Our SVX-series industrial HEPA vacuums connect directly to the grinders, capturing dust at the source. Your home or business stays clean, and the slab is left spotless and ready to bond.
Coastal Georgia slabs carry moisture. We test every floor for moisture vapor transmission before a drop of product goes down — and apply a dedicated moisture vapor barrier when the readings call for it.
Cracks, spalls, and pitting get patched with fast-setting repair mortars and ground flush. Expansion joints are honored so slab movement never telegraphs through your new floor.
Stained floors typically run two to three days — color deserves its cure time, and we give it every hour it needs.
The slab is ground uniformly open and HEPA-vacuumed spotless — the canvas stage.
Lithium silicate hardens the surface; repairs and edges are dressed.
Acid or water-based color applied, layered, and worked to your chosen depth.
Acid stains develop and are neutralized and rinsed; all floors dry fully before sealing.
Two clear coats — urethane indoors, urethane/siloxane outdoors — in your sheen.
"Frog Splash coated our entire auto shop — over 3,200 sq ft. They worked over a weekend so we lost zero business days. The floor has held up perfectly under daily vehicle and forklift traffic for over a year."
"We needed a USDA-compliant floor for our commercial kitchen. Frog Splash handled the spec, the coved base, and the whole installation without disrupting our lunch service. Health inspector approved on the first visit."
"Our warehouse had over 8,000 sq ft of damaged concrete. Frog Splash phased the work over two weekends — we never shut down. The floor is now completely transformed and we haven't had a maintenance issue since."
Frog Splash Coatings stains and seals concrete for homes and businesses across Savannah, Pooler, Richmond Hill, Statesboro, Hinesville, and Brunswick, Georgia — plus Bluffton and Hilton Head, South Carolina.
Get Your No-Hassle Estimate Today