Diamond grinding, lithium silicate densifier, and a premium urethane/siloxane finish — the natural concrete look with 7–15 years of real protection.
Diamond grinding plus a premium clear sealer system — the natural, industrial-modern concrete look, dust-proofed and defended.
Grind & seal sits between bare concrete and a full coating system — and for a lot of spaces it's the sweet spot. We grind the slab clean and smooth, harden it from within, and seal it under clear protective coats. The concrete's natural face stays on display: the swirls, the aggregate peeking through, the story the slab already tells. What changes is everything underneath your experience of it — no more dusting, no more staining, no more drinking in every spill.
Our five-step system goes beyond the basic "grind it and roll some sealer" job. After grinding, we treat the slab with a lithium silicate densifier that penetrates and hardens the surface from within. Then a penetrating base sealer ties into the densified concrete, and the finish is a premium urethane/siloxane hybrid topcoat — a two-front defense that most sealed floors simply don't have.
The hybrid chemistry is the special sauce. The aliphatic urethane side builds a tough, UV-stable wear film on top — the part that handles foot traffic, tires, and equipment. The siloxane side penetrates into the concrete and repels water and UV from inside the surface. Protection from the outside in and the inside out — which is why this finish thrives in places ordinary sealers fail, including outdoors.
Grind & Seal — Layer by Layer
Not all clear sealers are created anywhere near equal. Here's how the options actually stack up.
| System | UV Stable | Breathable | Outdoor Use | Maintenance | Typical Lifespan |
|---|---|---|---|---|---|
| Urethane/Siloxane (our Grind & Seal) | Excellent | Yes | Excellent | Very Low | 7–15 years |
| Acrylic Sealer | Moderate | Yes | Moderate | Frequent recoats | 2–5 years |
| Epoxy Clear Coat | No — yellows | No | Indoors only | Low | 5–10 years |
| Penetrating Silane Only | N/A (no film) | Yes | Water repel only | Low | 3–7 years |
| Bare Concrete | — | — | — | High — stains & dusts | — |
Anywhere you want the concrete look with none of the concrete problems.
Free estimates with sheen samples on your actual slab, so you pick matte or gloss with your own eyes.
Book My Free Estimate Call (912) 656-2536Ninety percent of coating failures trace back to poor preparation. That's why we never skip it — and never rush it.
The grind is half the name and more than half the work. Our 20–30 inch propane diamond grinders remove old coatings, laitance, and surface impurities and leave the slab uniformly open — the difference between a sealer that bonds for a decade and one that flakes in a season. SVX-series HEPA vacuums capture the dust at the source, so occupied shops and homes stay clean while we work.
Our 20–30 inch propane planetary diamond grinders profile the entire slab evenly — no cords, no missed spots, no shortcuts. Every floor is mechanically ground to the correct concrete surface profile (CSP) for the system going down on top of it.
Our SVX-series industrial HEPA vacuums connect directly to the grinders, capturing dust at the source. Your home or business stays clean, and the slab is left spotless and ready to bond.
Coastal Georgia slabs carry moisture. We test every floor for moisture vapor transmission before a drop of product goes down — and apply a dedicated moisture vapor barrier when the readings call for it.
Cracks, spalls, and pitting get patched with fast-setting repair mortars and ground flush. Expansion joints are honored so slab movement never telegraphs through your new floor.
Every step has a job. Together they turn a dusty slab into a decade-plus floor over about two days.
Open the concrete pores and remove all coatings, laitance, and surface impurities.
Industrial HEPA vacuums pull every trace of grind dust for a receptive surface.
Lithium silicate penetrates and hardens the concrete from within.
Base sealer bonds into the densified slab for maximum adhesion.
Premium topcoat — UV-stable, waterproof, and ready for traffic.
"Frog Splash coated our entire auto shop — over 3,200 sq ft. They worked over a weekend so we lost zero business days. The floor has held up perfectly under daily vehicle and forklift traffic for over a year."
"We needed a USDA-compliant floor for our commercial kitchen. Frog Splash handled the spec, the coved base, and the whole installation without disrupting our lunch service. Health inspector approved on the first visit."
"Our warehouse had over 8,000 sq ft of damaged concrete. Frog Splash phased the work over two weekends — we never shut down. The floor is now completely transformed and we haven't had a maintenance issue since."
Frog Splash Coatings provides grind & seal concrete services across Savannah, Pooler, Richmond Hill, Statesboro, Hinesville, and Brunswick, Georgia — and over the bridge in Bluffton and Hilton Head, South Carolina.
Get Your No-Hassle Estimate Today